FAQs

How Long Does It Take To Charge?

Charging time is between 60-70 minutes to reach a full charge.

Can You Fine Tune The Balance?

You can offset the balance by pressing the Fine-Tuning buttons to correct the orientation.

Does It Have Altitude Hold?

You can precisely lock the height and location, ensuring stable hovering and enabling convenient shooting from any angle.

Does It Have FPV (First Person View) Capability?

The Wi-Fi real-time transmission FPV system allows you to connect your phone to the drone, providing a direct view on your mobile device. This enables you to enjoy the world beyond the horizon, capture photos, and record videos to create lasting memories.

My drone is not staying on course or is out of control.

Check to ensure that there are no strong winds that may be impacting the course of the drone. Try bringing the drone at least 30 cm from the ground to reduce instability. Follow the instructions for the Fine-Tuning function to further stabilize the drone’s flight. Ensure that you are keeping the remote control within 100 meters of the drone at all times during flight.

My drone is failing to ascend.

If your drone is failing to ascend, please check the battery levels of your controller and drone and ensure that they are fully charged. Make sure that the rotation of the blades is fast enough to cause the drone to ascend.

My drone is landing too fast.

If your drone is landing too fast, try manually pulling down the throttle stick slowly so that your drone loses altitude at a slower pace.

My WiFi connection to the drone keeps dropping.

If your phone is disconnecting from the drone’s WiFi signal, you may need to adjust one of two settings on your phone:

1. When connecting to the drone’s WiFi, your phone may ask if you want to stay connected to this WiFi signal even though it does not have an internet connection. Check the box next to this setting.
2. Some phones allow for prioritizing specific WiFi network connections. Making your drone’s WiFi network the highest priority may help with your connection stability without impacting your normal usage.

My controller is failing to connect.

Check to ensure that both the controller and the drone are turned on and have sufficient battery life. If they are still failing to connect, please reset both units and follow the directions to connect the transmitter and receiver again.

How do I initiate a backflip?

Press the 360 button on the top right of the controller and you will hear a beep. Push the right joystick forward for a front flip, back for a back flip, right for a right flip and left for a left flip.